The Pentruder Modular Drill System MD1 is a versatile and powerful drilling system. It allows you to drill in any angle and the gearbox gives the system a very smooth and efficient run.
Quick disconnect couplings reduced the set up time. Small and big drill bits can be drilled in a shorter time than anyone thought possible. Drills an 800 mm hole like other systems drills a 200 mm hole.
Combine different modules to suit your need. The basic equipment is a base plate, column, roller carriage, spindle unit, gearbox and HF-motor. The HF-drill system can be driven by the 15, 18 or 22 kW HF-motor.
Pentruder MD1 high frequency drilling machine can either be built on the wall saw track (MCCS) or on the 70 mm column system, see System or the Data sheet.
Peripheral speeds with different size of core bits
Spindle rpm with spindle units ST2 and ST3
Torque with spindle units ST2 and ST3 :
All technical data can be subject to change without notice.
BE1 Base plate fixed / BE2 adjustable
quick disconnect coupling:
CN Columns F/M-70 Female / Male coupling, extendable, 0.5 / 1.2 / 1.5 m:
6.8, 12.1, 14.5 kg
CN Columns F/J-70 Female / Jack screw,
0.5 / 1.2 / 1.5 m:
7.0, 12.3, 14.7 kg
CN Column Female / plastic cap, 2 m
(only extendable at the bottom)
Column support adjustable cpl.:
CE1 Carriage for 70 mm columns:
PT-MD1 Electric feed unit MD1 (46:1):
4-speed gearbox MG41
Spindle Unit ST2/ST3
ERMD1 Extension adapter
HFMR-MG41 HF-Adapter for MG41 Gearbox
Different QDC adapters for Spindle Unit with QDC coupling.
Picture of MD1-MCCS with hydraulic motor.
Pentruder MD1 HF-drilling
machine with 15 kW HF-motor. Square column as drill rig.
Pentruder MD1 HF-drilling machine with 15 kW HF-motor Saw track (MCCS) as drill rig.