Pentruder MD1 HF drilling machine

The Pentruder Modular Drill System MD1 is a versatile and powerful drilling system. It allows you to drill in any angle and the gearbox gives the system a very smooth and efficient run.

Quick disconnect couplings reduced the set up time. Small and big drill bits can be drilled in a shorter time than anyone thought possible. Drills an 800 mm hole like other systems drills a 200 mm hole.

Combine different modules to suit your need. The basic equipment is a base plate, column, roller carriage, spindle unit, gearbox and HF-motor. The HF-drill system can be driven by the 15, 18 or 22 kW HF-motor.

Pentruder MD1 high frequency drilling machine can either be built on the wall saw track (MCCS) or on the 70 mm column system, see System or the Data sheet. 

  • Features

  • Technical data

  • System

  • Modules

  • Inquiry

 

Pentruder MD1 HF-Drilling Machine

 

Drill bit:

Max Ø drill bit with: Track (MCCS) 70 mm Column
Spindle unit ST2/ST3 (w/o ERMD1): 630 mm 600 mm
Spindle unit ST2/ST3 (1 x ERMD1): 820 mm 790 mm
Spindle unit ST2/ST3 (2 x ERMD1): 1010 mm 980 mm
Spindle unit ST2/ST3 (3 x ERMD1: 1200 mm 1170 mm

 

Peripheral speeds with different size of core bits

 

 

Spindle rpm with spindle units ST2 and ST3

Pentpak 418 / 422 / 427 1:st gear
2:nd gear
3:rd gear
4:th gear
15 kW HF-motor + ST2: 0-80 rpm 0-125 rpm 0-215 rpm 0-345 rpm
15 kW HF-motor + ST3: 0-160 rpm 0-260 rpm 0-445 rpm 0-700 rpm
18/22 kW HF-motor + ST2: 0-55 rpm 0-90 rpm 0-150 rpm 0-240 rpm
18/22 kW HF-motor + ST3: 0-115 rpm 0-180 rpm 0-315 rpm 0-500 rpm

 

Torque with spindle units ST2 and ST3 :

Pentpak 418 / 422 / 427 1:st gear
2:nd gear
3:rd gear
4:th gear
15 kW HF-motor + ST2:  1450 Nm  910 Nm  530 Nm  330 Nm
15 kW HF-motor + ST3:  700 Nm  440 Nm  250 Nm  160 Nm
18 kW HF-motor + ST2:  1740 Nm  1100 Nm  640 Nm  400 Nm
18 kW HF-motor + ST3:  840 Nm  530 Nm  310 Nm  190 Nm
22 kW HF-motor + ST2:  2120 Nm  1340 Nm  780 Nm  490 Nm
22 kW HF-motor + ST3:  1020 Nm  640 Nm  370 Nm  230 Nm

 

Pentpak  427
 

Input voltage: 380-480 V
Input frequency: 50-60 Hz
Minimum fuse with 15 / 18 / 22 kW HF-motor 16 Amp
Recommended fuse with 15 / 18 / 22 kW HF-motor: 32 / 40 / 63 Amp
Recommended generator size:  45 kVA
Weight: 26 kg

 

 

HF-motors

 

  15 kW 18 kW 22 kW
Weight in kg 13 kg 16.5 kg 18 kg
Weight in lbs 28.6 lbs 36 lbs 40 lbs


All technical data can be subject to change without notice.

Spindle rpm with spindle units ST2 and ST3

 

 

 

Pentruder MD1 HF-drilling
machine with 15 kW HF-motor. Square column as drill rig. 

 

 

 

Pentruder MD1 HF-drilling machine with 15 kW HF-motor Saw track (MCCS) as drill rig.