Rig with saw track (MCCS)

 

Pentruder MCCS is a truly modular system based on the wall saw track. The track is used both for the wire saw rig and for the drill rig, as well as for other more special set ups.

 

 

Base plates and wheel kits

     

 

     

BTS-4 Base plate

  BTS-5 Base plate    

Base plate for TS type tracks, rectangular, 

220 x 320 mm / 8.7"x12.6"

 

Base plate for TS type tracks, rectangular,
280 x 400 mm / 11”x15.75”

 

 

         
   
WT-BTS4 Wheel kit for BTS-4   WT-BTS5-200 Wheel kit for BTS-5   WT-BTS5-300 Wheel kit for BTS-5
Wheel Ø 200 mm, width 400 mm   Wheel Ø 200 mm, width 400 mm   Wheel Ø 300 mm, width 680 mm

 

MCCS Universal Drill Rig

 

Track

   

   

Pentruder MCCS Universal Drill Rig

 

TS Single T-slot track

  TP3 Track stop

With the TS track, a BTS base plate and a CER-M3-U carriage we offer a light-weight, yet very stable drill stand for any kind of drill motor. A wheel kit for easy transport is available. 

(The triangular base plate shown on the picture is no longer available)

 

The TS track is used for wall sawing, wire sawing, drilling and other applications.
Fits base plates BTS3 and BTS4.
It comes in the lengths 0.85, 1.15, 1.7, 2.0, 2.3 and 3.45 meters / 33”, 45”, 67”, 79”, 90.5”, 11’.

Read more »

 

The TP3 track stop can be used to set the depth when drilling.

 

Gliding carriages CEG for saw track (MCCS)
 


   

CEG-E-3P8 Carriage, Gliding,

Electric, for 3P8

 

CEG-E-MD1 Carriage, Gliding,

Electric, for MD1

 

CEG-M25 Carriage, Gliding, Manual feed

 

Carriage which glides on the track with teflon liners.
Electric automatic feed for 3P8 high frequency wire saw.
Total gear ratio 5000:1.
Max feed speed 0.4 m/min.

 

Carriage which glides on the track with teflon liners.
Electric automatic feed for MD1 high frequency drilling machine.

Manual feed is not possible.
Total gear ratio 2500:1.
Max feed speed 0.8 m/min

 

Carriage which glides on the track with teflon liners.
Manual feed. Lower carriage for 3P8 wire saw. Suitable for heavy drilling with big drill bits, chain sawing and more applications to come. 

 


   

CEG-HY32 Carriage, Gliding,

Hydraulic, for 3P8

 

CEG-HY12.5 Carriage, Gliding,

Hydraulic, for MD1

 

CEG-HY20 Carriage, Gliding,

Hydraulic, for MD1

Carriage which glides on the track with teflon liners.
Hydraulic automatic feed for 3P8 hydraulic wire saw.

Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max carriage speed 1.0 m/min.

 

Carriage which glides on the track with teflon liners.
For drilling with hydraulic MD1 and for chain sawing. 
Hydraulic automatic feed.

Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max feed speed 2.7 m/min.

 

Carriage which glides on the track with teflon liners.
For drilling with hydraulic MD1and for chain sawing.
Hydraulic automatic feed.

Manual feed is not possible.
Use with PP15, PP20 or PP25.
Max feed speed 1.7 m/min.

 

Roller Carriages CER for saw track (MCCS)
 


     

CER-M3-MD1 Carriage, Rollers,
Manual feed for MD1

 

CER-M-U Carriage, roller type, Universal, Manual feed

   

Carriage with tapered rollers like on the wall saws. Max drill bit Ø 750 mm. 
Manual feed.
Coupling for MD1 drilling machine.
Gear ratio 3:1

 

Carriage with tapered rollers like on the wall saws. Max drill bit Ø 750 mm. 
Manual feed for drill motors.
Gear ratio 3:1

   

 

Other modules
 

   

CEL-TS

 

CT-CEL 

  Hand crank for all CEG and CER Carriages
Carriage for line and corner drilling
with TS type tracks
 
 

Back support for CEL-TS

   
         
       

CEG-PDT1 Pivoting head

     

 

 

Carriage CEG-PDT1 pivoting head for TS track. Rear support included. 

       

      

 

 

 
ERMD1 Extension adapter   AE-MDU-MD1 Adapter plate for MDU on MD1   RST-TS1 Rear support for TS Track
Extension adapter for CEG, CER and CE1 carriages. Extends the drill bit capacity with 180 mm. More than one extension adapter can be used.    Adapter which is mounted on the MDU drive unit - NTGRA to be able to use the MDU drive unit with the CE1-70, CEG-M25 and CER-M3-MD1 carriages.   

When drilling with big diameter drill bits or deep holes, and when wire sawing we recommend using a Rear support. On the picture it is shown with the MD1 drill system with MDU drive unit, MG41 gearbox, ST3 spindle unit, two ERMD1 extension adapters and the CEG-M25 carriage .

Length: 2.1-3.2 m. 

       

 

 

   
   

Base plate for TS type tracks, rectangular,
220 x 320 mm / 8.7”x12.6”