CWF630HF
Bar length:
250 - 630 mm (10 - 25 ")
250 - 630 mm (10 - 25 ")
Flush cutting:
Yes, cuts within 4 mm of wall
Yes, cuts within 4 mm of wall
Output power:
9 kW (12 hp)
9 kW (12 hp)
Torque:
13 Nm (9.5 lbf)
13 Nm (9.5 lbf)
Slip clutch:
Yes
Yes
A chain saw engineered to stand up to your toughest jobs
9 kW (12hp) output power
Max cutting depth: 630 mm (25″)
Designed to run ICS bars, chains, and sprockets for optimum performance with cutting depths up to 25 inch / 63 cm.
| Bar length: | 250 - 630 mm (10 - 25 ") |
|---|---|
| Flush cutting: | Yes, cuts within 4 mm of wall |
| Output power: | 9 kW (12 hp) |
| Torque: | 13 Nm (9.5 lbf) |
| Slip clutch: | Yes |
| Max cutting depth: | 630 mm (25 ") |
| Weight: | 15 kg (33 lbs) |
| Detableable motor: | No |
| Motor speed: | 6500 rpm |
| Powerhead height: | 265 mm (10.4 ") |
| Powerhead length: | 585 mm (23 ") |
| Powerhead width: | 240 mm (9.45 ") |
| Vibration level: | 2.4 m/sec² (front handle)(Uncertainty K=1.5 m/sec²) 4.5 m/sec² (rear handle)(Uncertainty K=1.5 m/sec²) |
| Sound level (dB): | 94 dB @ 1 m |
| Noise level (dB): | 103 dB @ 1m |
| Water cooling: | Min. 1 gallon (4 litres) of cool water per minute at full power output. Water pressure: Min 1.5 bar (20 PSI) Max 6 bar (90 PSI) |
| Water fitting | Tema series 1800 |
| Powerpack: | Pentpak 427i Pentpak 222 |
| Voltage: | 380-480V 50/60Hz 200-230V 50/60Hz |
Water cooling
Min. 1 gallon (4 litres) of cool water per minute at full power output.
Water pressure:
Min 1.5 bar (20 PSI)
Max 6 bar (90 PSI)
Click below for pdf with product info and a recommended start package
