MDU3-60

Drill bit range:
80 - 600 mm (3" - 24")
Max output power:
8 kW (11 hp)
Spindle speed range
100 - 900 RPM
Number of speeds:
15 including neutral and reverse
Weight drill motor:
Manual feed: 15 kg (33.1 lb)
With Autofeed: 16.7 kg (36.8 lb)
Weight drill carriage with autofeed:
CER2-AF: 9.3 kg (20.5 lb)

Take your drilling to new depths

The MDU3-60 is a new and revolutionary drill motor for both the smaller service jobs and the special challenges. You will always have the capacity to finish the job.

Available with a unique fully integrated autofeed motor, patented by Pentruder, or manual feed.

 

 

Send me more information

    The Pentruder MDU3 is a versatile and powerful drilling system with a possibility to change the Drop gears in order to change the model to either MDU3-30, MDU3-60 or MDU3-100. This gives the system a very smooth and efficient run and offers a wide speed range for different sizes of drill bits.

    With the quick disconnect couplings you will reduce the set up time, and if the drill bit would get stuck you can easily disconnect it and reverse the machine.

    With the newly developed Autofeed small and big drill bits can be drilled in a shorter time than anyone thought possible, and when you have reached the desired depth you can choose in the setting if you want the machine to just stop, or if you want it to back up to the starting position on the track.

    Pentruder MDU3 Core drill is used together with the same TS-tracks as for the Pentruder Wall saws for max stability.

     

    Drill bit range: 80 - 600 mm (3" - 24")
    Max output power: 8 kW (11 hp)
    Spindle speed range 100 - 900 RPM
    Number of speeds: 15 including neutral and reverse
    Weight drill motor: Manual feed: 15 kg (33.1 lb)
    With Autofeed: 16.7 kg (36.8 lb)
    Weight drill carriage with autofeed: CER2-AF: 9.3 kg (20.5 lb)
    Max output power: 8 kW (11 hp)
    Drill bit range: 80 - 600 mm
    Spindle speed range: 100 - 900 RPM
    Max torque: 120 Nm
    Drop Gear ratio: 12:24
    Power supply: No separate power pack needed, connect directly to 380 - 480V 50/60HZ 3-phase supply
    Drive: Integrated drive and control electronics
    Feed: Available with Pentruders unique and patented integrated autofeed or manual feed
    Display: Yes, built in.
    Shows: Amp, voltage, power, RPM, angle, etc.
    Pentruder App: By connecting your MDU3 to the Pentruder App you will be able to get updates, trouble shooting and see error codes.
    The app also mirrors the display so you can easily step back from the machine, let the Autofeed do its job and still get all drilling data
    Quick change drill bit couplings: DR-1-1/4"
    DR-CR1-28
    DR-1/2" BSPP
    DR-A-ROD
    DRF-84
    DRF-94
    DRF-100
    Drill bit extensions: DED-250
    DED-500

    Core drill modules:

    Name:

    Description

    Weight:

    CER2-AF

    Drill carriage with built in Autofeed for the MDU3

    9.3 kg (20.5 lb)

    ERC1-87

    Extension adapter for the MDU3. Needed for drilling with larger diameters than 600mm.


     Drill bit adapters

    Drill bit adapters with quick disconnect coupling for the MDU3:

    DR-1-1/4"

    DR-CR1-28

    DR-1/2" BSPP

    DR-A-ROD


    Drill bit flanges

    Drill bit flanges with quick disconnect coupling for the MDU3:

    DRF-84

    DRF-94

    DRF-100

    Drill bit extension adapters

    Drill bit extension adapters with quick disconnect coupling for the MDU3:

    DED-250: 250 mm long

    DED-500: 500 mm long

    HK-2

    Hand crank for manual drilling, can be placed on either side of the drill motor.


    __________________
    Click below for product folder in pdf for the MDU3

    Product videos

    Compare


    Spindle speed range:

    200 - 1800 RPM

    100 - 900 RPM

    50 - 450 RPM

    Max torque:

    60 Nm

    120 Nm

    240 Nm

    Drill bit range

    50 - 300 mm 

    (2" - 12")

    80 - 600 mm 

    ( 3" - 24")

    125 - 1000 mm

    (5" - 40")

    Drop gear ratio:

    24:12

    18:18

    12:24