Pentpak 3
Pentruder HFi powerpack for RS2 Wall saw
- Low weight, less than 17 kg (37lb)
- Low maintenance
- Very robust
- Very efficient cooling
- Waterproof IP64
- Only one cable needed to connect the Pentpak to the RS2
Product information
- Low weight, less than 17 kg (37lb)
- Low maintenance
- Very robust
- Very efficient cooling
- Waterproof IP64
- Only one cable needed to connect the Pentpak to the RS2
Pentpak 3 400V | used with RS2 wall saw |
Input voltage | 380 - 480 V 3-phase supply with PE |
Input frequency | 50 - 60 Hz |
Minimum fuse* | 16 Ampere |
Recommended fuse | 32 Ampere |
Currect draw at max. output | 31 Ampere |
Recommended generator size | 45 kVA |
Contains: | IC: 1846A-XBEE3 I IC: 6514A-RN42 |
Height incl. handles | 300 mm (12") |
Width incl. connectors | 180 mm (7") |
Length | 400 mm (16") |
Weight | 17 kg (37lb) |
Water cooling | 6 liters of cool water per minute |
Protection class | IP64 |
​​​​​​​* The power output must be reduced to about 65% by turning the feed and power regulation knob down. See amperage draw on RRC display.
Easy-to-service connector design
Connector pins and sockets are easily replaceable wear parts and can be replaced without need for special tools, requiring no crimping or soldering
14 pins in the connector for all necessary functions:
- 3 x blade motor
- 3 x Feed motor
- 3 x Travel motor
- 4 x communication
- 1 x earth